Crane Safety Sticker

ELECTROCUTION HAZARD TO AVOID DEATH OR SERIOUS INJURY, KEEP ALL PARTS OF THE CRANE, THE RIGGING AND MATERIALS BEING LIFTED AT LEAST 20 FEET AWAY FROM ALL ELECTRICAL POWER LINES AND EQUIPMENT FOLLOW INSTRUCTION IN OPERATOR AND SAFETY MANUALS

CRANE HAND SIGNALS FOR TOWER CRANES, PORTAL, AND PEDESTAL CRANES

ELECTROCUTION HAZARD DEATH OR SERIOUS INJURY MAINTAIN MINIMUM CLEARANCES BETWEEN THE CRANE AND/OR LOAD BEING HANDLED AND ENERGIZED POWER LINES

ELECTROCUTION HAZARD TO AVOID DEATH OR SERIOUS INJURY, KEEP ALL PARTS OF THE CRANE, THE RIGGING AND MATERIALS BEING LIFTED AT LEAST 10 FEET AWAY FROM ALL ELECTRICAL POWER LINES AND EQUIPMENT FOLLOW INSTRUCTION IN OPERATOR AND SAFETY MANUALS

OUTRIGGER WILL CAUSE SERIOUS CRUSHING INJURY STAND CLEAR

BEFORE OPERATING THE CRANE IT IS COMPULSORY TO EXTEND THE OUTRIGGERS

CRANE SWING

ELECTROCUTION HAZARD To avoid death or serious injury, keep all parts of the crane, the rigging and materials being lifted at least 20 feet away from all electrical power lines and equipment Follow instruction in operator and safety manuals

CRANE HAND SIGNALS FOR MOBILE AND LOCOMOTIVE CRANES, MATERIAL HANDLER AND SIDE BOOM TRACTORS

DO NOT WALK UNDER HANGING LOAD

[Graphic] Hoist

CRANE HAND SIGNALS FOR SINGLE-GIRDER TOP RUNNING CRANES, MONORAILS AND UNDERHUNG CRANES, JACKS, INDUSTRIAL ROLLERS, AIR CASTERS AND TELESCOPIC HYDRAULIC GANTRY SYSTEMS

CRANE HAND SIGNALS FOR CONTAINER CRANES, DERRICKS, FLOATING CRANES AND FLOATING DERRICKS

____TON WORKING LOAD LIMIT

CRUSHING HAZARD STAND CLEAR OF MOVING OUTRIGGERS

MAXIMUM LOAD ____ LBS

MAXIMUM LOAD CAPACITY____ LBS

OVERHEAD CRANE NOT ENERGIZED

OVERHEAD CRANE HARD HAT REQUIRED WHEN IN USE

DO NOT EXCEED WORK LOAD LIMIT (WLL)

ELECTROCUTION HAZARD To avoid death or serious injury, keep all parts of the crane, the rigging and materials being lifted at least 20 feet away from all electrical power lines and equipment Follow instruction in operator and safety manuals

ELECTROCUTION HAZARD DEATH OR SERIOUS INJURY MAINTAIN MINIMUM CLEARANCES WITH ENERGIZED POWER LINES WHILE IN TRANSITION WITH NO LOAD AND BOOM LOWERED

SAFETY GLASSES, SAFETY SHOES AND HARD HATS REQUIRED WHEN WORKING IN CRANE AREA

TWO-BLOCKING THE CRANE WILL CAUSE DEATH, SERIOUS INJURY OR PROPERTY DAMAGE DO NOT ALLOW THE HOOK BLOCK TO CONTACT THE BOOM TIP BY HOISTING UP, EXTENDING OR LOWERING THE BOOM

ELECTROCUTION HAZARD KEEP ALL PARTS OF THIS CRANE AT LEAST 20 FEET AWAY FROM ELECTRICAL POWER LINES AND EQUIPMENT

HARD HAT REQUIRED WHILE CRANE IN OPERATION

ELECTROCUTION HAZARD TO AVOID DEATH OR SERIOUS INJURY, KEEP ALL PARTS OF THE CRANE, THE RIGGING AND MATERIALS BEING LIFTED AT LEAST 20 FEET AWAY FROM ALL ELECTRICAL POWER LINES AND EQUIPMENT FOLLOW INSTRUCTION IN OPERATOR AND SAFETY MANUALS

AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS YOU HAVE BEEN TRAINED IN THE SAFE OPERATION OF THIS CRANE

[Graphic] Hoist

ROTATING DRIVELINE CONTACT WILL CAUSE DEATH OR SERIOUS INJURY KEEP AWAY KEEP CLEAR OF ROTATING DRIVE SHAFT NEVER WORK ON AN INSTALLED POWER TAKE-OFF WITH THE ENGINE RUNNING

KEEP CLEAR OF LIFTED OR MOVING LOADS

Hard hat required while Crane in Operation

ELECTROCUTION HAZARD To avoid death or serious injury, keep all parts of the crane, the rigging and materials being lifted at least 10 feet away from all electrical power lines and equipment Follow instruction in operator and safety manuals

[Graphic] Hoist

SAFETY GLASSES, SAFETY SHOES AND HARD HATS REQUIRED WHEN WORKING IN CRANE AREA

[Graphic] Hoist

OVERHEAD CRANE STAY OUT FROM UNDER SUSPENDED LOAD

ELECTROCUTION HAZARD TO AVOID DEATH OR SERIOUS INJURY, KEEP ALL PARTS OF THE CRANE, THE RIGGING AND MATERIALS BEING LIFTED AT LEAST 10 FEET AWAY FROM ALL ELECTRICAL POWER LINES AND EQUIPMENT FOLLOW INSTRUCTION IN OPERATOR AND SAFETY MANUALS

SAFETY GLASSES, SAFETY SHOES AND HARD HATS REQUIRED WHEN WORKING IN CRANE AREA

ELECTROCUTION HAZARD To avoid death or serious injury, keep all parts of the crane, the rigging and materials being lifted at least 10 feet away from all electrical power lines and equipment Follow instruction in operator and safety manuals

DO NOT ATTACH FALL PROTECTION TO OVERHEAD CRANE STRUCTURE

Safety glasses, Safety shoes and Hard hats required when working in Crane area

ELECTROCUTION HAZARD TO AVOID DEATH OR SERIOUS INJURY, KEEP ALL PARTS OF THE CRANE, THE RIGGING AND MATERIALS BEING LIFTED AT LEAST 10 FEET AWAY FROM ALL ELECTRICAL POWER LINES AND EQUIPMENT FOLLOW INSTRUCTION IN OPERATOR AND SAFETY MANUALS

HARD HAT REQUIRED WHILE CRANE IN OPERATION

ELECTROCUTION HAZARD TO AVOID DEATH OR SERIOUS INJURY, KEEP ALL PARTS OF THE CRANE, THE RIGGING AND MATERIALS BEING LIFTED AT LEAST 20 FEET AWAY FROM ALL ELECTRICAL POWER LINES AND EQUIPMENT FOLLOW INSTRUCTION IN OPERATOR AND SAFETY MANUALS

ELECTROCUTION HAZARD TO AVOID DEATH OR SERIOUS INJURY, KEEP ALL PARTS OF THE CRANE, THE RIGGING AND MATERIALS BEING LIFTED AT LEAST 20 FEET AWAY FROM ALL ELECTRICAL POWER LINES AND EQUIPMENT FOLLOW INSTRUCTION IN OPERATOR AND SAFETY MANUALS

OVERHEAD CRANE STAY OUT FROM UNDER SUSPENDED LOADS

SAFETY GLASSES, SAFETY SHOES AND HARD HATS REQUIRED WHEN WORKING IN CRANE AREA